Construction Home Improvement

Most Typically Used Flat Roofing Materials and Tools

Flat Roofing Materials

Picking the right materials and tools when it comes to flat roofing is very important as it will determine the work that will be done on the roofing and how long the flat roof will last. You should research thoroughly when picking your flat roof materials and tools to avoid future problems that could be easily avoided. Strandek Flat Roofing Bristol provides high-quality flat roofing services for both commercial or residential projects. Here are some of the typically used flat roofing materials and tools:

Flat Roofing Materials

Metal Roofing

Metal roofing is durable and has the longest lifespan as compared to other flat roofing materials lasting for about 20 to 30 years. It is the most expensive flat roofing system to have installed due to its nature and expert installation process. It is a good choice to use it on a building that has a roof slope that is greater than 2 inches.

Modified Bitumen Roof

Due to the use of an asphalt membrane as its base, the modified bitumen has a short lifespan of 10 to 15 years. This is because its surface is susceptible to blistering and cracking. However, it is a cheaper option when it comes to the flat roofing system.

PVC Roofing

It has a long lifespan with low maintenance. It has a reinforced membrane that makes it resistant to cracking and impact damage. It is considered the best material for flat roofing thus making it more expensive as compared to other single-ply roofing materials.

TPO Roofing

Its lifespan ranges between 10 to 20 years. Compared to EPDM roofs, it requires less maintenance and has the same kind of energy-saving properties as PVC roofs. They are among the best for flat roof materials and are not expensive to install.

Fibreglass (GRP) Roofing

Due to its strength, it has a fairly long lifespan of over 30 years. It has low maintenance characteristics as it is resistant to tearing and impact. It consists of plywood or marine grade which is covered by a resin. This kind of flat roof material is quite popular and is easy to install thus making it an inexpensive roofing option.

EPDM Roofing

It is not easily damaged thus giving it a long lifespan of about 50 years. Having a single layer of synthetic rubber provides a weatherproof covering for a flat roof. The good thing about EPDM roofing material is that it can be used over older pre-existing flat roofs. Due to its easy installation process, it is not an expensive flat roofing material option.

Flat Roofing Tools

When it comes to roofing tools, you will require a roofer’s tool kit. It however depends on whether you want to slate a roof or lead a roof. Here are some of the tools you will need to slate a roof:

Slate Hammers

A slate hammer is used for either trimming or cutting slate, punching holes in slate, and even driving nails inside the slate during installation. You can use a slate hammer when restoring, installing, or even repairing slate roofs.

Slate Rippers

Slate rippers are used for removing slates on an existing slate roof when in need of repair or even restoration. Due to its design, it makes removing nails and even slates easy by either chopping or pulling the nails. A slate ripper is a good tool to use if you are facing the situation of broken pieces of slates.


Slate cutters are tools that come in handy when you need to cut thin pieces of slate. You can even use a slate cutter when you want to make convex or concave shapes on your slate. Slate cutters are the best when you want an accurate cut or to cut several slates. You can also use a slate cutter to trim natural slates.

Spare Blades for Cutters

It is good to have spare blades for slate cutters, especially when working with several slates. This is in case the blade you were using for cutting gets blunt or damaged.

Jackson Slate Layer Tool

The Jackson slate layer tool is used for holding slates in place. They can be adjusted to different slate sizes whether man-made, natural, or cement-fibre slates.

When it comes to lead roofing, quality lead roofing tools are the key elements to getting good lead work. Here are some of the essential tools you will need for this kind of work:

Lead Dressers

They are tools used to shape or even flatten out lead sheets before installation.

Lead Seaming Tools

They are tools used for positioning or even clamping sheet metal.

Bending Tools

When it comes to bending, seaming pliers can do the trick. You can use the seaming pliers to form, bend or even clinch sheet materials while carrying out your roofing activities.

Holing Tools

They are used for cutting holes in slates

The above are just examples of roofing tools you can use while carrying out your roofing installation. Ensure that you pick the right tools for your roofing as some roofing materials need specific tool kits to install them such as fibreglass roofing materials which require fibreglass flat roof kits.

About the author

David Evans

David is Editor-in-chief.

Add Comment

Click here to post a comment

Your email address will not be published. Required fields are marked *